The Dunder Mifflin floor is a wide, low office, not a tall tower. The Office LEGO display case is a low tabletop acrylic cabinet sized for LEGO Ideas The Office set 21336, with clear panels and a black base shaped to locate the finished model. If 21336 is already built, start with the The Office LEGO display case made for that set number, then leave room above the cover so you can lift it off to adjust a chair or a minifigure.
What The Office LEGO display case is sized for
The listing is designed for LEGO 21336 Ideas The Office. Use the set number on your box or instructions rather than a similar office layout in a photograph. Another workplace or cafe scene is not a reason to assume this cabinet will fit.
The case is listed at 36 cm wide, 32 cm deep and 9.3 cm tall. Those figures describe the display structure, not internal clearance around monitors or raised chairs, so leave room above the cover to lift it off. The panels are 3 mm clear acrylic, with a black acrylic display base, plus screws and connector cubes for assembly. The listing is the clear case configuration; no printed background is included. The clear cover lifts off the base and sits back in the base grooves. Assemble the panels on a clean, flat surface, then locate the model in the shaped base before you lower the cover.
A slightly taller cafe case for Central Perk
A cafe scene uses a similar low, wide format, but it is not the same footprint as 21336. An acrylic display case for LEGO Ideas Central Perk (21319) is a tabletop case designed for set 21319. It is listed at 39.3 cm wide, 24.2 cm deep and 14.5 cm tall, with 3 mm clear acrylic panels and a black acrylic base. You can choose a clear background or a printed studio scene; a printed background is included only with the Printed Background option. Leave space above the 14.5 cm height to lift the cover. Match the exact set number before ordering, and do not assume the 21336 cover will fit 21319, or the other way around.
A wider low case for two apartments
If the apartments from Friends will sit near the office, they need a much longer shelf run. An acrylic display case for LEGO The Friends Apartments (10292) is a low acrylic case designed for set 10292. It is listed at 70 cm wide, 35 cm deep and 15.3 cm tall, with 3 mm clear acrylic panels and a choice of a printed background or a clear configuration. A clear top lets you look down into the apartment layouts, and the cover lifts away to adjust the rooms. Measure the shelf before you line this 70 cm case up with the 36 cm Office cabinet.
A taller house case for Home Alone
A suburban house is a different problem from a single-floor office. An acrylic display case for LEGO Home Alone (21330) is a tabletop enclosure designed specifically for LEGO Ideas Home Alone set 21330. The exterior is listed at 62 cm wide, 41 cm deep and 30.3 cm tall — far taller than the 9.3 cm Office cover — so it will not slip onto the same low shelf. The case is supplied as a parts kit and uses slot-and-tab connections, with screws and connecting blocks where needed. The transparent enclosure lifts vertically from the base and lowers back into a locating groove. Place the completed house first, and check that roof sections and projecting details remain clear of the panels. The clear version keeps the surrounding room visible; a printed background is offered when you want a stronger exterior setting.
A wall-mounted option for Downton Abbey
Not every TV or film interior has to stay on a shelf. A wall frame / display case for LEGO Downton Abbey (21373) is made for set 21373 and is offered in more than one format, so select the configuration before you add it to the cart. The 3D LED Wall Frame is listed at 50 × 80 × 20 cm (19.69 × 31.50 × 7.87 in). It is an open acrylic frame, wall-mounted only, with two adjustable top spotlights and illuminated leaded windows, a UV-printed castle-interior backdrop, and USB power with a cable included. If you want a sealed cabinet instead, the 5 mm thickened basic case is listed at 60 × 40 × 18 cm and can sit on a tabletop or hang on a wall, with a magnetic front door. The collector display case is a tabletop cabinet listed at 51 × 42 × 31 cm, with a raised base, a UV-printed estate backdrop and a magnetic front door. Check the exact set number before ordering; the models shown in product photos are not included.
Placement and care
Confirm set 21336 for The Office case, and match every other cabinet to its own set number. Plan 36 cm by 32 cm of shelf space and 9.3 cm of height for 21336, plus room to lift the cover. Assemble on a clean, flat surface and remove protective film from the acrylic panels before you join them. Keep roof peaks, hanging signs and raised chairs clear of the panels when you lower a cover. Do not treat a low office case, a 30.3 cm house case and a wall-mounted Downton frame as interchangeable footprints.
Final thoughts
Choosing The Office LEGO display case starts with set 21336, a 36 × 32 × 9.3 cm tabletop footprint, and a lift-off clear cover over a shaped black base. Give cafe and apartment scenes their own low cases if they share the room, leave vertical space for a taller Home Alone house, and use a dedicated 21373 configuration if Downton Abbey is going on the wall.
Display products only. LEGO® models and sets are not included. LEGO® is a trademark of the LEGO Group, which does not sponsor or endorse this content.